HydroGen Results

9th November 2011

Completion of the Technology Strategy Board funded HydroGEN Project

ITM Power (AIM: ITM), the energy storage and green fuel company, is pleased to announce the outcome of a recently completed three year collaboration project based on the development of the Company’s unique suite of alkaline membrane materials. The project, co-funded by the Technology Strategy Board, focused on the realisation of electrolyser cost reduction through advances in materials technology and system simplification.

The key advancement within the project was a new alkaline solid polymer membrane. This material, together with the low cost catalysts and injection moulded components developed, offer a prototype stack costing 43% of its PEM counterpart. In addition, the properties of the membrane material enable simplification of electrolyser balance of plant, providing routes to further balance of plant savings.

The important achievements realised within the project are outlined below:

  • A low cost alkaline membrane based on the Company’s unique suite of hydrocarbon polymers
  • Elimination of precious metal catalysts
  • Characterisation in an electrolyser up to 2A/cm2
  • Simplification of water management balance of plant
  • Low cost injection moulded cell plates
  • Ongoing cyclic and continuous testing has accrued over 1 year’s durability data
  • Prototype stack cost reduction of 57% (compared to PEM-based stack)

Development and Testing of an Alkaline Solid Polymer Membrane

ITM Power has developed a new electrolyser membrane platform which operates in a re-circulating liquid alkaline environment and transports OH- rather than H+ ions. The alkaline environment enables alternative, lower cost non-precious metal catalyst materials to be used. The high ionic conductivity makes high current densities achievable which in turn keeps stack sizes small. The high water permeability allows considerable simplification in the water management system.

Removal of Precious Metal Catalysts

The removal of precious metal catalysts has long been understood to be key to achieving a step change in the cost of electrolysis, and therefore hydrogen production. The University of Southampton and Teer Coatings Ltd (MIBA Coatings Group) worked together to develop no-precious metal, low cost catalysts which could be used in conjunction with ITM Power’s novel alkaline membranes also developed within this programme. Working with these partners ITM Power has developed membrane electrode assemblies (MEAs) which show stable performance in a variety of duty cycles and continuous operation in excess of 2,000 hours without signs of degradation.

Increasing Current Density

Conventional liquid alkaline electrolysis tends to be restricted to low current density (<1A/cm2) operation. The solid alkaline membrane developed in this project has been characterised to 2A/cm2 and subjected to longevity testing at 1.67A/cm2. Higher current density enables more hydrogen to be generated from an electrolyser stack and as such is a very important parameter in reducing cost, offering a pathway to use fewer cells.

Low Cost Stack Component

Boddingtons Plastics Ltd has developed moulded plastic cell plates to ITM Power’s unique design, further reducing stack costs.

Low Cost Balance of Plant Development

The development of hydrophilic alkaline membranes has enabled engineering and stack design advances which significantly reduce system costs, the most significant of which is dry cathode operation. In this mode, water is back diffused from the low pressure anode side of the stack through the membrane to the cathode. This avoids costly water management systems while retaining the ability to access high current density operation.

These developments have culminated in significant potential for cost reductions which will be further developed under the Company’s EU grant funded programme which was announced recently.

Commenting for ITM Power Dr Graham Cooley said “Alkaline solid polymer electrolysis offers a potentially unique way of both eliminating platinum catalysts and retaining high current density and durability; essentially getting the best out of both PEM and liquid alkaline technologies. We are very pleased with these results and have chosen to extend testing”.

Commenting for the Technology Strategy Board, Lead Technologist Richard Kemp-Harper said:”This new technology has the potential to generate a viable fuel created from renewable power, which is a very interesting proposition. The scale of the cost reduction is a credit to ITM Power and their consortium partners and demonstrates the commercial value generated from well-targeted R and D funding. We are delighted to have been able to support this valuable project.”

For further information please visit www.itm-power.com or contact:

ITM Power plc,
Dr Simon Bourne, CTO,
0114 244 5111

Nomura Code Securities Limited
Juliet Thompson / Dr Christopher Golden
+44 (0)20 7776 1200

Tavistock Communications,
Simon Hudson / Andrew Dunn,
020 7920 3150

About the Technology Strategy Board

The Technology Strategy Board is a business-led government body which works to create economic growth by ensuring that the UK is a global leader in innovation. Sponsored by the Department for Business, Innovation and Skills (BIS), the Technology Strategy Board brings together business, research and the public sector, supporting and accelerating the development of innovative products and services to meet market needs, tackle major societal challenges and help build the future economy. For more information please visit www.innovateuk.org

About ITM Power

ITM Power designs and manufactures Hydrogen Energy Systems for Energy Storage and Clean Fuel production. ITM Power has grown from its original platform of novel polymeric electrolytes (for water electrolysis and hydrogen fuel cells) to that of a technology provider. ITM Power now has both a strong base of intellectual property and engineering expertise for providing complete hydrogen solutions and CE marked products for sale.

Rebecca Markillie
Marketing & Communications
E: rlm@itm-power.com
Recent stories
  • 100MW Power-to-Gas (P2G) energy storage feasibility study

    28th September 2018
    ITM Power is pleased to announce funding from Innovate UK for a feasibility study to deploy a 100MW Power-to-Gas (P2G) energy storage project, “Project Centurion” at Runcorn, Cheshire, UK.
  • ITM Power Opens Seventh Hydrogen Refuelling Station at Johnson Matthey’s Swindon site on M4 corridor

    26th September 2018
    ITM Power and Johnson Matthey are pleased to announce the opening of ITM Power’s seventh public access hydrogen refuelling station (HRS) located at Johnson Matthey, Swindon on the M4 corridor. The opening is being supported by Toyota, Hyundai and Honda who will also present and participate in a Q&A session. Attendees will also be able to experience a zero emission journey in a Fuel Cell Electric Vehicle (FCEV) Ride and Drive which will be available at the opening.
All news stories